Planning of Active 108 Burglar Alarm System.

Active 108 is an 2 Zone Burglar Alarm which Provides 100% security for your Properties.It Consists of 2 Zones , 1 Panic zone , 2 Siren Provision,Provision to connect back up battery.Activation & Deactivation of the system is done through Key.It has 2 Modes of Operation Day Mode/Night Mode

Now Lets See how to plan the installation of Active 108 Burglar/Intrusion Alarm System.
  Zone 1

Zone 1 Must be connected to Main door of the home, because Zone 1 has the time delay feature ,which provides you time to enter home and deactivate the system. Control panel should be placed near main door but at a safe place where you can reach in few seconds.With in the Time delay time you need to deactivate the system else the siren will start ringing.

Zone 2

Areas such as Windows,Shutters,etc can be connected to Zone 2 in series connection, Zone 2 is immediate Zone,Once the zones are violated it alerts the control panel immediately and the sirens starts ringing.

Panic Zone

Active 108 has an separate Zone for Panic,using this zone you can connect an panic switch/Button and place It in an area where kids cant reach but accessible for you during emergency situations (For example Bedroom etc).Once Panic switch is switched the siren starts ringing.

Sirens

Active 108 has provision for 2 Sirens, Make sure you place both sirens at various end of the home.If placed at same place burglars can tamper both at same time,if placed at various place if one siren is tampered another will start ringing immediately as both sirens terminals have tamper provisions which you can use.